Solution 1:
- Turn on the printer.
- Uninstall the ink cartridges.
- Unplug the power cable from your printer without turning off .
- Press the # and 6 at the same time you turn the printer off.
- Plug the power cable back in and don't release the buttons yet until the small screen on the printer becomes blank or off.
- Then release after.
- Change the settings and choose the language.
- Reinstall the ink cartridges.
- Press the setup button. and its ready to go.
- Held down the # and the 3 and reset the unit.
- It's done
- Turn your printer on, remove the power cable at the back of your printer while the printer is on.
- Press and hold the # key and 3 key on the keypad, plug back the power cable without releasing those buttons, until you can see the Welcome screen or Inproper shut down.
- Press OK to continue.
# and 3 Partial Reset
# and 6 Semi-Full Reset
# and 9 Full Reset
A Full Reset will clear any stored information in the printer, speed dials, etc, so always start with a partial reset and work your way up.
Solution 4:
- Change the power of terhe printer
0 comments:
Post a Comment